Need Help? - Call: 0161 624 6211 or email: sales@owen-brothers.com

Cart:

0
You have no items in your shopping cart.

0

CT Operated Three Phase

CT Operated Meters are used extensively for measuring current and monitoring the operation of the power grid. Along with voltage leads, revenue-grade CTs drive the electrical utility's watt-hour meter on virtually every building with three-phase service and single-phase services greater than 100 amps. The CT is typically described by its current ratio from primary to secondary. Often, multiple CTs are installed as a "stack" for various uses. For example, protection devices and revenue metering may use separate CTs to provide isolation between metering and protection circuits, and allows current transformers with different characteristics (accuracy, overload performance) to be used for the devices.

Items 1 to 20 of 22 total

Page:
  1. 1
  2. 2

List  Grid 

  1. OB3000 Multi-function Panel Meter

    OB3000 Multi-function Panel Meter

    OB3000_Panel_Meter_2014.pdf

    • Din 96x96mm
    • Accuracy better than class1
    • Dual pulsed output (Type 1)
    • RS485 Modbus RTU output (Type 2)
    • Backlit LCD display
    • Total Harmonic Distortion as standard
    • Easy set up and installation 
    Learn More

    Regular Price: £99.99

    Special Price £79.99

    Be the first to review this product

  2. OB737CT Meter in Steel Enclosure

    OB737 CT Meter in Steel Enclosure

    SGS0130-Owen-Brothers-OB737Measuring Instruments Directive (MID 2004/22/EC)

    OB737 CT Operated Meter in Poweder Coated Steel Enclosure.

    OB737CT series is a Polyphase Smart Energy Meter packed with all the features & functionality to cover the most demanding of projects.

    Fully MID Approved Annex B & D - suitable for renewable FIT/ROC export energy, industrial/commercial billing etc.

    Three phase direct 100A metering - 7 DIN modules, Standard DIN rail Format (DIN43880)

    High Accuracy - IEC62053-21/22 Class 1.0,0.5S

    ● Import & Export active energy

    ● Import & Export reactive energy

    ● Instant Volt, Amp, Power factor, Frequency, Active power, Reactive power & Apparent power

    Industrial control & AMR compatible

    ● Isolated pulse output and IR (DIN43864)

    ● RS485 communication port, Modbus Protocol

    Large clear backlit display

    Learn More
    £149.99
  3. OB2750 kWh Meter Pulse and Modbus RTU

    OB2750 kWh Meter Pulse and Modbus RTU

    • Din 96x96mm
    • Accuracy better than class1
    • Dual pulsed output
    • RS485 Modbus RTU output
    • Backlit LCD display
    • Easy set up and installation
    Learn More
  4. IP65 MID Polyphase CT Operated Kit ST-A

    IP65 MID Polyphase CT Operated Kit ST-A

    SGS0130-Owen-Brothers-OB737Measuring Instruments Directive (MID 2004/22/EC)

    Owen Brothers Metering can supply any DIN-Rail or Panel Mounted meter within our range in quality sealable metering panels also known as Meter Management Units or MMU’s that provide quick, easy and safe installation of CT operated devices.

    Our metering panels include as standard DIN terminals for Current Transformer, Fuse (Including spare fuse within each carrier), Earth & Neutral disconnect with options such as Test Terminal Block (TTB) or CT shorting block assemblies for safe, accurate and legal installations.

     

    Learn More

    Regular Price: £279.99

    Special Price £245.00

  5. 17th Edition, MID Polyphase CT Operated Kit TTB A

    17th Edition, MID Polyphase CT Operated Kit TTB A

    SGS0130-Owen-Brothers-OB737Measuring Instruments Directive (MID 2004/22/EC)

    Owen Brothers Metering can supply any DIN-Rail or Panel Mounted meter within our range in quality sealable metering panels also known as Meter Management Units or MMU’s that provide quick, easy and safe installation of CT operated devices.

    Our metering panels include as standard DIN terminals for Current Transformer, Fuse (Including spare fuse within each carrier), Earth & Neutral disconnect with options such as Test Terminal Block (TTB) or CT shorting block assemblies for safe, accurate and legal installations.

     

    Learn More

    Regular Price: £270.00

    Special Price £224.99

  6. OB737 Multifunction CT Meter MID B & D

    OB737 Multifunction CT Meter MID B & D

    SGS0130-Owen-Brothers-OB737Measuring Instruments Directive (MID 2004/22/EC)

    OB737 series is a Polyphase Smart Energy Meter packed with all the features & functionality to cover the most demanding of projects.

    Fully MID Approved Annex B & D - suitable for renewable FIT/ROC export energy, industrial/commercial billing etc.

    Three phase direct 100A metering - 7 DIN modules, Standard DIN rail Format (DIN43880)

    High Accuracy - IEC62053-21/22 Class 1.0,0.5S

    ● Import & Export active energy

    ● Import & Export reactive energy

    ● Instant Volt, Amp, Power factor, Frequency, Active power, Reactive power & Apparent power

    Industrial control & AMR compatible

    ● Isolated pulse output and IR (DIN43864)

    ● RS485 communication port, Modbus Protocol

    Large clear backlit display

    Data Sheet

    Learn More

    Regular Price: £124.99

    Special Price £94.95

    As low as: £75.96

    Be the first to review this product

  7. Iskraemeco MT174CT
  8. COP5 LV METERING PANEL

    COP5 LV METERING PANEL

    COP 5 Metering Panel Learn More
    £578.00
  9. COP5 HV METERING PANEL

    COP5 HV METERING PANEL

    COP 5 Metering Panel Learn More
    £530.00
  10. ISKRA CT Operated Meter MT375

    ISKRA CT Operated Meter MT375

    The ME375 is targeted at deregulated energy markets and enables provision of an AMR and prepayment service. It is a three phase meter designed for use in a residential application. The meter incorporates a fully integrated GSM/GPRS modem that can be exchanged with integrated RS485 communications interface for block installations. The meter is approved according to IEC 62052-11, IEC 62053-21 and IS0 9001. Technical Specification CT Operated / Direct Connected (In Line) Three Phase Networks MID Approved Import/Export Energy Tariff control input Small size modern design Intergrated GSM/GPRS Modem Cost Effective Accuracy class: 2 or 1 Voltage range: 1.15 Un Max. current: 6A (5A ct operated) Reference voltage: 3x230/400V Reference frequency: 50/60Hz Operating temp. range: -25 to+60° C Extended temp. range:-40 to +70° C Storage temperature: -40 to+85° C Self-consumption current 0.5VA Self-consumption Voltage 2W / 10VA Short-circuit current: 30 Imax Learn More
  11. ISKRA Three Phase PV MID Meter MT171CT

    ISKRA Three Phase PV MID Meter MT171CT

    The MT171 CT three phase electronic meters are designed for electric energy measurement and registration in three phase four-wire networks. Measuring and technical characteristics of the meters comply with the IEC 62052-11 and IEC 62053-21 (IEC 61036) international standards for electronic active energy meters, class 1 or 2. The meters are designed and manufactured in compliance with the standards and ISO 9001. MT171 – Three-Phase Electronic Meter The MT171 three-phase electronic meters are designed for measuring and registration of active energy in three-phase four-wire network for direct connection. Measuring and technical characteristics of the meter comply with the IEC 62052-11and IEC 62053-21 (IEC 61036) international standards for electronic active energy meters, class 1 or 2. The meters are designed and manufactured in compliance with the standards and ISO 9001 as well as more severe Iskraemeco standards. Learn More
  12. IP65 3 Phase - MID CT Operated Meter Kit A

    IP65 3 Phase - MID CT Operated Meter Kit A

    SGS0130-Owen-Brothers-OB737Measuring Instruments Directive (MID 2004/22/EC)

    Owen Brothers Metering can supply any DIN-Rail or Panel Mounted meter within our range in quality sealable metering panels also known as Meter Management Units or MMU’s that provide quick, easy and safe installation of CT operated devices.

    Our metering panels include as standard DIN terminals for Current Transformer, Fuse (Including spare fuse within each carrier), Earth & Neutral disconnect with options such as Test Terminal Block (TTB) or CT shorting block assemblies for safe, accurate and legal installations.

     

    Learn More
  13. Type 22985 Back Connected Test Terminal Block (clear polycarbonate  Front cover. 11 – 32mm and 2 – 60mm studs.)

    Type 22985 Back Connected Test Terminal Block (clear polycarbonate Front cover. 11 – 32mm and 2 – 60mm studs.)

    Type 22985 – Drw 4735A – Standard back connected with clear polycarbonate Front cover. 11 – 32mm and 2 – 60mm studs. Terminal Test Blocks can be used for testing a wide range of electrical equipment including intergrating meters and protective relays, without disturbing the normal load circuit. Terminal arrangements can be adapted to suit many applications eatures Terminal arrangements cover a wide range of applications Front and back connected types All terminals and screws are plated brass Moulded insulation barriers between sets of terminals Link facilities for testing purposes Learn More
  14. CT Operated Meter Installation Block
  15. Type 22989 Front Connected Test Terminal Block (extended clear polycarbonate front cover)

    Type 22989 Front Connected Test Terminal Block (extended clear polycarbonate front cover)

    Type 22989 – Drw. 4731B – Standard front connected with extended clear polycarbonate front cover. Terminal Test Blocks can be used for testing a wide range of electrical equipment including intergrating meters and protective relays, without disturbing the normal load circuit. Terminal arrangements can be adapted to suit many applications eatures Terminal arrangements cover a wide range of applications Front and back connected types All terminals and screws are plated brass Moulded insulation barriers between sets of terminals Link facilities for testing purposes IEEE Standard Requirements for Instrument Transformers C57.13, 17th edition. Learn More
  16. Type 22983 Front Connected Test Terminal Block

    Type 22983 Front Connected Test Terminal Block

    Type 22983 – Drw.4731A – Standard front connected test terminal block with Standard clear polycarbonate front cover. Learn More
  17. Type 22979 12 Way Front Connected Test Terminal Block

    Type 22979 12 Way Front Connected Test Terminal Block

    Type 22979 - Front connected 12 way, 3 sets of 4 current terminals with 3 rotary links per set. With insulated fences between the sets. Clear polycarbonate standard cover. Learn More
  18. Type 22990 Front Connected Test Terminal Block

    Type 22990 Front Connected Test Terminal Block

    Type 22990 Front connected test terminal blocks which have vertical sliding disconnect links on the voltage and neutral terminals with insulated barriers between each voltage terminals and neutral terminals, with rotary links on the three sets of 3 current terminals with 2 links per set, which give a good visible indication of disconnections. With clear polycarbonate front covers. IEEE Standard Requirements for Instrument Transformers C57.13, 17th edition. Learn More
  19. Test Terminal Block Type 22995A
  20. Test Terminal Block 22984 Back Connected

    Test Terminal Block 22984 Back Connected

    Back Connected Test Terminal Block Type 22984 IEEE Standard Requirements for Instrument Transformers C57.13, 17th edition. Drawing Number 4735 Learn More

Items 1 to 20 of 22 total

Page:
  1. 1
  2. 2

List  Grid